The development and integration of the MC6 motion controller into the extensive STOBER product portfolio allows for drive engineering solutions from a single source. Use of the CODESYS programming system allows open motion control system concepts (IEC 61131-3) to be realized. The MC6 motion controller is also suitable for use as a PLC. The MC6 motion controller is available as cabinet PC version or as touch panel version.
|Processor||Intel® AtomTM Z530, 1.6 GHz||Intel® AtomTM Dual-Core E3825, 2x1.33 GHz||Intel® Core i3-3120ME, 2 x 2.4 GHz|
|L2 Cache||512 kB||1 MB||3 MB|
|Main memory||DDR2-RAM, 1 GB||DDR3-RAM, 2 GB||DDR3-RAM, 2 GB|
|Data memory||Internal SSD with 4 GB||Cfast card, 8 GB||Cfast card, 8 GB|
|Remanent memory||128 kB nvSRAM||128 kB nvRAM||128 kB MRAM|
|USB||3 USB 2.0 interfaces||3 USB 2.0 interfaces||4 USB 3.0 interfaces|
|EtherCAT||Realtek RTL8111 Ethernet controller||Realtek RTL8111 Ethernet controller||Realtek RTL8111 Ethernet controller|
|Network||1 x 10/100 Mbit/s Ethernet||1 x 10/100 Mbit/s Ethernet||Realtek RTL8111 Ethernet controller|
|RS-232||Serial RS-232 interface: D-sub connector, 9-pin||Serial RS-232 interface: D-sub connector, 9-pin||Serial RS-232 interface: D-sub connector, 9-pin|
|CANopen||CANopen interface: D-sub connector, 9-pin||CANopen interface: D-sub connector, 9-pin||CANopen interface: D-sub connector, 9-pin|
|Video||DVI-D monitor (single link)||DVI-D monitor (single link)||DVI-D monitor (single link)|
|Surrounding operating temperature||0 -50 °C||0 - 45 °C||0 - 45 °C|
|Storage temperature||-20 - 75 °C||-20 - 75 °C||-20 - 75 °C|
The application for highly dynamic precision axe
The motion control function calculates centrally the complete motion sequence of all servo axes.
Cabinet PC version.
The MC6 motion controller is suitable for use as a programmable logic controller (PLC) or as motion controller for certain areas of comprehensive systems with higher-level PLC.
The super compact construction and fanless convection cooling facilitate cabinet installation without any specific measures (DIN rail on rear).
HMI panels (from other manufacturers) can be connected and their connection is easy.
Touch panel version.
This MC6 motion controller version is particulary suitable as a PLC for the control of machines or plants. With its ready to install, fully integrated construction and fanless convection cooling the MC6 motion controller with touch panel is suitable for many applications across the board.
The SD6 drive controller is optimized for motion control applications.
With the high performance SD6 drive controller and the MC6 motion controller, the constant customer demands for faster cycle times and an increase in output can be convincingly and reliably met.
This license is always a part of a motion controller MC6.
Motion programming with PLCopen compliant modules.
3D-CNC-Editor DIN 66025 (G-Code, dynamic)